Month: December 2024

Why impelleis deformed due to collision? –Damaged impeller–Turbin wheel damaged ~Reason: The high-speed rotating impeller encounters external debris, causing the impeller to malfunctionDamaged by collision.When installing a turbocharger, be sure to carefully check the intake pipeCheck for debris in the exhaust pipe.After the impeller is damaged, the dynamic balance of the rotor is disrupted, and […]

–Carbon deposition on rotor shaft–Carbon deposition on bearings Due to high exhaust temperature or sudden shutdown, it can cause the rotor to malfunctionShaft or bearing volume charcoal.Before stopping the machine, it should idle for 3-5 minutes to increase the pressureThe device gradually cools down.When suddenly shut down, the high temperature of the turbine casing is […]

–Scratches on bearings caused by dirt–Dirt scratches the inner hole of the bearing body ~Possible reasons: Poor quality engine oil can seriously damage the surface of bearings.When installing a new turbocharger, it is necessary to replace the quality of the oil and filter, and strictly follow the manufacturer’s regulations for regular replacement.Reasons for dirty engine […]

The lubrication system of the turbocharger has malfunctioned or is not rotating before startingThe crankshaft fills the lubricating oil circuit with oil, causing damage to the surface of the bearing systemWear and burn. ~Possible reasons: The lubrication system was not connected during the installation of the turbocharger.Air entering the lubrication system creates air resistance.Not started […]

Severe lack of engine oil can cause the thrust bearing to burn out or even be damagedcrack.The rotor shaft is severely lacking in oil, causing the shaft to become brittle under long-term high temperatures,This leads to the fracture of the rotor shaft.Oil pump malfunction,The engine tilts excessively, causing the oil suction disc to detach from […]